128 Nortel Networks L2/3 Ethernet Switch Module for IBM Eserver BladeCenter
/cfg/l3/vrrp/vrid 4/del
/cfg/l3/vrrp/hot dis
/cfg/l3/vrrp/group/dis
/* Configuration below for GbESM 2 (address .244) only
/cfg/l3/frwd/on
/cfg/l3/gw 1
addr 10.45.0.245
ena
/cfg/l3/gw 2
addr 10.46.0.246
ena
/* create new vlans for uplink ports and reassign ports as needed
/cfg/l2/vlan 45/ena
/cfg/l2/vlan 46/ena
/cfg/port ext1/tag dis
/cfg/port ext2/tag dis
/cfg/port ext3/tag ena
/cfg/port ext5/tag dis
/cfg/port ext6/tag dis
/cfg/l2/vlan 46/def ext1 ext2
/cfg/l2/vlan 45/def ext5 ext6
/cfg/l2/vlan 10/add ext3
/cfg/l2/vlan 20/add ext3
/cfg/l3/if 45
ena
vlan 45
addr 10.45.0.244
mask 255.255.255.0
/cfg/l3/if 46
ena
vlan 46
addr 10.46.0.244
mask 255.255.255.0
/* the below lines clean up unused items from the previous sample
/cfg/vlan 46/del
/cfg/l3/if 46/del
/cfg/l3/vrrp/vrid 3/del
/cfg/l3/vrrp/vrid 4/del
/cfg/l3/vrrp/hot dis
/cfg/l3/vrrp/group/dis
To Next Page
Loading...
