IBM Nortel Networks L2/3 - Page 147

Chapter 7. Nortel Networks L2/3 GbESM configuration and network integration 133
Interface Send Recv Triggered RIP Key-chain
Vlan35 2 2
Vlan36 2 2
Vlan45 2 2
Vlan46 2 2
GigabitEthernet0/23 2 2
GigabitEthernet0/24 2 2
Automatic network summarization is in effect
Maximum path: 4
Routing for Networks:
10.0.0.0
Routing Information Sources:
Gateway Distance Last Update
10.46.0.244 120 00:00:00
10.36.0.243 120 00:00:02
Distance: (default is 120)
Core2#sh ip rip database
10.0.0.0/8 auto-summary
10.10.0.0/24
[1] via 10.46.0.244, 00:00:07, Vlan46
[1] via 10.36.0.243, 00:00:07, Vlan36
10.20.0.0/24
[1] via 10.46.0.244, 00:00:07, Vlan46
[1] via 10.36.0.243, 00:00:07, Vlan36
10.35.0.0/24
[1] via 10.36.0.243, 00:00:07, Vlan36
10.36.0.0/24 directly connected, Vlan36
10.45.0.0/24
[1] via 10.46.0.244, 00:00:07, Vlan46
10.46.0.0/24 directly connected, Vlan46
10.99.0.0/24 directly connected, GigabitEthernet0/24
GbESM commands to verify OSPF
In addition to the /i/l3/route/dump command shown in Example 7-37 on page 132,
/i/l3/ospf/dump provides detailed OSPF information. The /i/l3/ospf/nbr command lists
the neighboring switches that the GbESM is connected to via OSPF. Unlike RIP, OSPF uses
persistent connections with its neighbors which can be listed (see Example 7-38).
Example 7-38 GbESM commands to verify OSPF
/i/l3/route/du
Status code: * - best
Destination Mask Gateway Type Tag Metr If
--------------- --------------- --------------- --------- --------- ---- --
0.0.0.0 0.0.0.0 10.36.0.246 indirect ospf 1 36
0.0.0.0 0.0.0.0 9.42.171.242 indirect static 128
* 9.42.171.0 255.255.255.0 9.42.171.243 direct fixed 128
* 9.42.171.243 255.255.255.255 9.42.171.243 local addr 128
* 9.42.171.255 255.255.255.255 9.42.171.255 broadcast broadcast 128
* 10.10.0.0 255.255.255.0 10.10.0.243 direct fixed 10
* 10.10.0.243 255.255.255.255 10.10.0.243 local addr 10
* 10.10.0.255 255.255.255.255 10.10.0.255 broadcast broadcast 10
* 10.20.0.0 255.255.255.0 10.20.0.243 direct fixed 20
* 10.20.0.243 255.255.255.255 10.20.0.243 local addr 20
* 10.20.0.255 255.255.255.255 10.20.0.255 broadcast broadcast 20
* 10.35.0.0 255.255.255.0 10.35.0.243 direct fixed 35
* 10.35.0.243 255.255.255.255 10.35.0.243 local addr 35
* 10.35.0.255 255.255.255.255 10.35.0.255 broadcast broadcast 35