EasyManua.ls Logo

IBM Nortel Networks L2/3 - Page 150

IBM Nortel Networks L2/3
190 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
136 Nortel Networks L2/3 Ethernet Switch Module for IBM Eserver BladeCenter
Cisco commands to verify OSPF
The following commands are in addition to the Cisco commands used for RIP (see
Example 7-39):
sh ip ospf neighbor Lists the OSPF neighbors of the current switch.
sh ip ospf database Provides a dump of the OSPF topology database, which includes
all switches in the same area as the one where the command is
issued.
Example 7-39 Cisco commands to verify OSPF
sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is 9.42.171.3 to network 0.0.0.0
9.0.0.0/24 is subnetted, 1 subnets
C 9.42.171.0 is directly connected, GigabitEthernet0/24
10.0.0.0/24 is subnetted, 7 subnets
O 10.10.0.0 [110/2] via 10.46.0.244, 00:25:13, Vlan46
[110/2] via 10.36.0.243, 00:25:13, Vlan36
O 10.20.0.0 [110/2] via 10.46.0.244, 00:25:13, Vlan46
[110/2] via 10.36.0.243, 00:25:13, Vlan36
C 10.46.0.0 is directly connected, Vlan46
O 10.45.0.0 [110/2] via 10.46.0.244, 00:25:13, Vlan46
O 10.35.0.0 [110/2] via 10.36.0.243, 00:25:13, Vlan36
C 10.36.0.0 is directly connected, Vlan36
C 10.99.0.0 is directly connected, GigabitEthernet0/24
S* 0.0.0.0/0 [1/0] via 9.42.171.3
Core2#sh ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
9.42.171.244 1 FULL/DR 00:00:31 10.46.0.244 Vlan46
10.10.0.243 1 FULL/BDR 00:00:39 10.36.0.243 Vlan36
Core2#sh ip ospf database
OSPF Router with ID (10.56.0.246) (Process ID 9)
Router Link States (Area 0.0.0.9)
Link ID ADV Router Age Seq# Checksum Link count
9.42.171.243 9.42.171.243 1750 0x80000012 0x00AC14 4
9.42.171.244 9.42.171.244 1567 0x80000017 0x006D2D 4
10.10.0.243 10.10.0.243 1537 0x80000003 0x00491C 4
10.56.0.246 10.56.0.246 1532 0x80000010 0x0023D5 2
Net Link States (Area 0.0.0.9)
Link ID ADV Router Age Seq# Checksum
10.10.0.244 9.42.171.244 1577 0x80000007 0x00405B
10.20.0.244 9.42.171.244 1577 0x80000007 0x00C7C9

Table of Contents

Related product manuals