IBM Nortel Networks L2/3 - Page 91

Chapter 7. Nortel Networks L2/3 GbESM configuration and network integration 77
name "VLAN_Green"
def INT2 INT3 EXT1 EXT2 /* def INT2 EXT1 EXT2
/c/l2/vlan 20
ena
name "VLAN_Red"
def INT1 INT2 EXT1 EXT2 /* def INT1 INT2 INT3 EXT1 EXT2
/c/l2/vlan 99
ena
name "MGMT"
def INT4 EXT1 EXT2
/c/l2/stg 1/off
/c/l2/stg 1/clear
/c/l2/stg 1/add 1 5 10 20 99
/c/l2/trunk 1
ena
failovr ena
add EXT1
add EXT2
/c/l3/if 99
ena
addr 10.99.0.243 /* addr 10.99.0.244
mask 255.255.255.0
broad 10.99.0.255
vlan 99
/c/l3/gw 1
ena
addr 10.99.0.245 /* addr 10.99.0.246
/
script end /**** DO NOT EDIT THIS LINE!
Example 7-10 Basic topology Core switch configuration - tagging and etherchannel
Core1#sh run
Building configuration...
Current configuration : 2383 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Core1 ! hostname Core2
!
enable password cisco
!
no aaa new-model
ip subnet-zero
no ip domain-lookup
!
!
!
!
!
!
no file verify auto
spanning-tree mode pvst