Connect the power cord to the power connector. If there is a label
covering the power connector, remove it. Connect the power cords
to the computer, monitor, and other devices first, and then plug
the cords into properly grounded electrical outlets.
Power
Important:
When the power cord is first plugged in, the computer
powers on for a few seconds, then powers off. This is
normal operation.
In some circumstances, the computer might not power off
immediately when the power switch is pressed. In this
case, hold the power switch down until the power turns
off.
Connect the phone line connector for models with a modem.
If your computer comes with an Ethernet adapter, connect the
Ethernet cable.
Ethernet
Ethernet
Important
Category 5 Ethernet cable must be used for operation of the
system within FCC Class B limits.
14 PC 300GL User Guide
To Next Page
Loading...
