IBM PCjr - Page 383

Power Transformer Replacement 1477
1.
2.
3.
4.
5.
Place transformer on base in area next to fuse-filter
card (note positioning of two connectors).
Install two base mounting screws 0
Install screw in ground wire 0, if present.
Plug coimector 0 into fuse-filter card.
Plugconnector 0 intocontrol circuit card.
• •
6. Replace top cover (1434).
7. Replace access cover (1430).
8. Replace forms rack (1440).
Graphics Printer 4-1400-51