IBM PCjr

10
6-8 Fli^t Things First
If you are using a television, set the
Computer/Television switch on your
IBM Connector for Television to
"Computer" and the Channel
switch to the same channel you
selected for your television. If the
channel you select does not seem to
work well try the other. Make sure
the IBM Connector for Television is
connected to the VHP terminal on
your television. Go to Step 9.
Computer/
Television
Switch
Channel
Switch to
3 or 4
Plug yom television or display into a
working wall outlet. Turn your
display or television power on. Go
to Step 10.
If you have any cartridges or
diskettes in yom IBM PCyr, remove
them.