IBM PCjr

11
12
13
Plug your IBM VCjr into a working
wall outlet. Go to Step 12.
Turn your IBM VCjr power on.
Did the three responses occur?
YES - Go to Step 13.
NO- Go to Step 21.
If you do not have a cartridge, go to
Step 20.
If you do have a cartridge, insert it
into the left cartridge slot of your
IBM PCyr as shown below.
Hold your cartridge with the label
side up so you can read it.
Firmly sUde the cartridge into either
slot until it snaps in place. If it does
not snap in place make sure you have
the label side up.
First Things First 6-11