IBM PCjr

27 Turn your television power off. Go
to Step 28.
28 Disconnect your IBM Connector for
Television from the rear of your IBM
PCyr. Go to Step 29.
29 Set the Computer/Television switch
on the IBM Connector for
Television to "Television" Go to
Step 30.
30 Set your television channel to a local
station. Go to Step 31.
31 Turn your television power on.
Does your television work?
YES - Have your IBM Connector
for Television and your
IBM PCyr serviced. See
"Service Information" in
this section.
NO - Connect your IBM PCyr to
a working Television.
6-20 First Things First