IBM PCjr

13 Someblank screensappear briefly
and then the First IBM PCjr Test
Menu Screen appears. A message
appears under the Test Tag "8".
The meaning of the message is
shown below:
* You have completed the
80CDTEST. Go to Step
14.
A You do not have enough
memory installed to run the
80CDTEST. This test
requires the 64KB memory
and display expansion
option installed in your
IBM PCjr. If you have the
64KB memory and display
expansion option installed,
have your IBM PCjr
serviced. See "Service
Information" in this
section. If you do not have
the 64KB memory and
display expansion option
installed go to Step 14.
B Have your IBM PCjr
serviced. See "Service
Information" in this
section.
? You have interrupted the
80CD TEST before it was
complete by pressing En
and then pressing Break.
Go to Step 14.
SOCDTest 6-67