EasyManuals Logo
Home>IBM>Server>Power Systems 5148-21L

IBM Power Systems 5148-21L User Manual

IBM Power Systems 5148-21L
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Bootable
Yes
Environmental
Table 4. Operating conditions
USB Removable Disk Drive Operating conditions Non-operating conditions
Temperature 5°C - 55°C –40°C - 65°C
Relative humidity 8% - 90% noncondensing 5% - 95% noncondensing
Maximum wet bulb temperature 29.4°C noncondensing 40°C noncondensing
Maximum temperature gradient 20°C per hour 20°C per hour
Altitude –300 meters (–984.25 ft) to 3048 m
(10,000 ft)
–300 meters (–984.25 ft) to 12,192 m
(40,000 ft)
Operating system or partition requirements
If you are installing a new feature, ensure that you have the software that is required to support the new
feature and that you determine whether there are any prerequisites for this feature and attaching devices.
For information about the prerequisites, see the IBM Prerequisite website (www-912.ibm.com/e_dir/
eServerPrereq.nsf).
The media device is supported on the following versions of the operating systems:
v AIX
AIX 7.1, or later.
AIX 6.1, or later.
v Linux
Red Hat Enterprise Linux Version 6, or later.
SUSE Linux Enterprise Server 11, Service Pack 3, or later, with current maintenance updates
available from SUSE.
v IBM i
IBM i Version 7.2.
IBM i Version 7.1, or later.
Using the USB Removable Disk Drive for backup and restore
The disk drive is a back up and restore device that can be used as an alternative to tape drives. The
removable disk drive is not a replacement for regular disk drives and cannot be used as part of a disk
array.
Note: If power is lost during a backup to the disk, the data can be compromised. Verify the data or rerun
the backup.
Using the disk drive with the AIX operating system
The AIX operating system names the drives as drive usbmsx, for example, usbms1, and usbms2. The AIX
operating system can also use the device as a raw device, for example, rusbms1 and rusbms2.
The AIX operating system uses the removable disk drive differently depending on the program that is
being used. The AIX command mksysb, builds a list of files to backup, creates a universal disk format
(UDF) file system, and puts a boot image and the root volume group on the removable disk drive. When
Managing devices 5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM Power Systems 5148-21L and is the answer not in the manual?

IBM Power Systems 5148-21L Specifications

General IconGeneral
BrandIBM
ModelPower Systems 5148-21L
CategoryServer
LanguageEnglish

Related product manuals