Figure 49. Removing the TIM from the system processor module
b) If your system has a second system processor, repeat step “19.a” on page 51 to remove the other
system processor module.
20. Remove the system processor module or modules:
a) Open the packaging of the system processor module tray. Remove the tray cover and set it aside.
Place the system processor module tray on a solid surface.
b) Ensure that the removal tool (A) is in the open position as shown in Figure 50 on page 53. The
middle pin (B) must be pushed down and blue tabs (C) must be turned inward.
52
Power Systems: System backplane
To Next Page
Loading...
