IBM Power Systems Series Site And Hardware Planning

v
The front rack opening must be 535 mm (21.06 in.) wide for dimension C (the width between the
outsides of the standard mounting flanges, see Figure 47 on page 89). The back rack opening must be
500 mm (19.69 in.) wide for dimension C (the width between the outsides of the standard mounting
flanges).
88 Site and hardware planning

IBM Power Systems Series Specifications

General

Virtualization	PowerVM
Architecture	POWER
Operating System	AIX, IBM i, Linux
Use Case	Enterprise workloads, cloud
Form Factor	Rack-mount
I/O	PCIe
Power Supply	Redundant power supplies available
Management	HMC (Hardware Management Console)
Processor	IBM POWER processors (POWER9, POWER10, etc.)
Storage	Supports various storage options including SSDs and HDDs