IBM Power Systems Series Site And Hardware Planning

Table 34. Dimensions
Maximum configuration
weight
Width Depth Height
The weight of the empty
rack is 244 kg (535 lb).
650 mm (25.5 in.) 1020 mm (40.0 in.) 1800 mm (71.0 in.)
Table 35. Temperature requirements
Operating Nonoperating
10°C - 38°C (50°F - 100.4°F) 1°C - 60°C (33.8°F - 140°F )
Table 36. Environment requirements
Environment Operating Nonoperating
Noncondensing humidity 8% - 80% 8% - 80%
Wet bulb temperature 22.8°C (73°F) 22.8°C (73°F)
Maximum altitude 3048 m (10000 ft) 3048 m (10000 ft)
Noise emissions Rack noise levels are a function of
the number and type of drawers
installed. See your server or
hardware specifications for specific
requirements
Rack noise levels are a function of
the number and type of drawers
installed. See your server or
hardware specifications for specific
requirements
Table 37. Service clearances
Front Back Sides Top
762 mm (30 in. ) 762 mm (30 in.) 762 mm (30 in.) 762 mm (30 in.)
Side and top clearances are optional during operation
Notes:
Figure 3. 0551 rack
20 Site and hardware planning

IBM Power Systems Series Specifications

General

Virtualization	PowerVM
Architecture	POWER
Operating System	AIX, IBM i, Linux
Use Case	Enterprise workloads, cloud
Form Factor	Rack-mount
I/O	PCIe
Power Supply	Redundant power supplies available
Management	HMC (Hardware Management Console)
Processor	IBM POWER processors (POWER9, POWER10, etc.)
Storage	Supports various storage options including SSDs and HDDs