IBM Power Systems Series Site And Hardware Planning

Table 43. Feature code 0133
IBM rack Rack, specify code PDU support Power cords
0551
1
0553
1
0555
0133
3
, 0137
3
0 to 4
2
0133, 0137, PDU
4
1
0551 is an empty 1.8 meter rack with 36 EIA units of total space. 0553 is a 2.0 meter rack with 42 EIA units of total
space.
2
0551, 0553, and 0555 feature codes 5160, 5161, 5163, and 7188. 7014 feature codes 7176, 7177, 7178, and 7188.
3
This feature provides a rack shelf (2 U) with rail assembly, cable-management-arm assembly, adapter plate, and a
pair of lift covers.
4
If unit plugs into a PDU, two feature code 6458, 6459, 6095, or 9911 power jumper cords are required.
Feature code 0134 - IBM service representation installation in rack; feature code 0138 -
IBM service representation installation in rack
Table 44. Feature code 0134
IBM rack Rack, specify code PDU support Power cords
0551
1
0553
1
0555
0134
3
, 0138
3
0 to 4
2
0134, 0138, PDU
4
1
0551 is an empty 1.8 meter rack with 36 EIA units of total space. 0553 is a 2.0 meter rack with 42 EIA units of total
space.
2
0551, 0553, and 0555 feature codes 5160, 5161, 5163, and 7188. 7014 feature codes 7176, 7177, 7178, and 7188.
3
This feature provides a rack shelf (2 U), cable-management-arm assembly, adapter plate, and a pair of lift covers.
4
If unit plugs into a PDU, two feature code 6458, 6459, 6095, or 9911 power jumper cords are required.
Figure 11. Feature code 0134
26 Site and hardware planning

IBM Power Systems Series Specifications

General

Virtualization	PowerVM
Architecture	POWER
Operating System	AIX, IBM i, Linux
Use Case	Enterprise workloads, cloud
Form Factor	Rack-mount
I/O	PCIe
Power Supply	Redundant power supplies available
Management	HMC (Hardware Management Console)
Processor	IBM POWER processors (POWER9, POWER10, etc.)
Storage	Supports various storage options including SSDs and HDDs