IBM ServeRAID-8 Series

8. The Array Created through Recover Data option message is displayed after
the array is created.
SRM GUI
To create an array by using the SRM GUI, complete the following steps:
1. Turn on the server and when you are prompted, press Ctrl+A to enter the
Adaptec BIOS Utility.
2. Select Array Configuration Utility and then select Create Array. The Array
Properties window opens.
3. Select the physical drives that are members of the previous configuration.
4. Select the previous RAID level.
5. Enter the previous stripe size.
6. Select the previous cache policy.
7. In the Initialization method field, select Recover Data.
8. The Array Created through Recover Data option message is displayed after
the array is created.
34 ServeRAID-8 Series: Best Practices and Maintenance Information