2.345!,/6,'!?
1<%@
Note Note Text
1 TL5 or later only
2 DVE support for AIX requires AIX 5.2 or later
3 Dynamic function support is not available for SUSE Linux Enterprise Server 8 for pSeries.
4 DVE is not supported by SAN Volume Controller
5 For additional configuration details and limitations view the appropriate README files
http://www-03.ibm.com/systems/storage/disk/index.html
6 System i support includes Open Power series servers.
9 Provides Metro Mirror, Global Copy, and Global Mirror capabilities
10 SAN Boot support for other operating systems not listed is via the RPQ process
11 Suppored for host attchment only. SLES 11 can not be used to manage the
DS4000/DS5000/DS5020 Storage Subsystems at this time.
12 RDAC multipathing required for multipath configurations
13 With Patch-52S_DS345K.081020.epkg.Z
14 AIX 5.3N supports AIX MPIO 5.3.9.2; AIX5.3-TL9+SP2+APAR IZ52471 supports AIX
MPIO 5.3.9.2
15 For additional configuration details and limitations view the appropriate README files
http://www-03.ibm.com/systems/storage/disk/index.html
16 with Patch-iz49529.epkg
17 AIX 6.1B supports AIX MPIO 6.1.2.2; AIX6.1-TL2+SP2+APAR IZ49639 supports AIX
MPIO 6.1.3.0
18 with Patch-IZ36221.081107.epkg.Z
21 NVRAM change required to support MPIO - Reference instructions in required eFix
23 Fix Pack 10.1 required
24 Supported on AIX levels : 6.1, 5.3 and 5.2
25 RDAC support only. No MPIO support at this time.
32 Full SFRAC product including VCS clustering
33 Operating Systems. LoP: RH5.1, SLES10.1, MPIO: AIX 5.3, AIX 6.1
40 AVT disabled
45 Expansion Unit 420 is only supported on DS4200.
48 MPIO only. No RDAC support at this time
49 Refer to the following link for details on IBM VIOS:
http://www14.software.ibm.com/webapp/set2/sas/f/vios/home.html,
50 Supported on CL 07.36.12 or later
52 Refer to the following link for further details on IBM SVC http://www-
03.ibm.com/systems/storage/software/virtualization/svc/
53 DS4000 and DS5000 famliy products can coexist on the same server.
55 If running NPIV refer to the multipathing document for detailed support. Customer is
responsible for making sure that the multipathing is loaded in the client OS.
58 Supported only in VIOS 2.1.0 at this time
59 No Direct Connect with Qlogic HBAs, QLE4060C, QLE4062C, QLA4050C, and
QLA4052C at this time
To Next Page
Loading...
Need help?
General