Need help?Do you have a question about the IBM System Storage TS3310 and is the answer not in the manual?
General| Model | TS3310 |
|---|---|
| Type | Tape Library |
| Power Supply | Dual redundant power supplies |
| Tape Technology | LTO (Linear Tape-Open) |
| Humidity | 20% to 80% non-condensing |
Learn how to access online technical support for your library.
Register for email notifications about firmware updates and new product information.
Provide feedback and suggestions for improving the publication.
Find contact information for IBM technical support services.
Alerts to potentially lethal or extremely hazardous situations, often electrical.
Alerts to potentially hazardous situations due to existing conditions.
Information regarding the safe use and compliance of laser components.
General safety guidelines for installing devices in a rack.
Details the types of power cords and plugs used by the library.
Information on responsible recycling and disposal of the library and its components.
Identifies the target users for the information in this manual.
Lists other IBM publications for additional information.
Details maximum capacities of different library configurations.
Identifies and describes components located on the front of the library.
Identifies and describes components located on the rear of the library.
Lists and describes the internal components of the library.
Lists additional features that can enhance library performance.
Explains the numbering system used to identify library components.
Provides physical and environmental specifications for the library.
Describes the recommended operating environment for the library.
Guide to partitioning the library into logical units for resource management.
Information on sharing the library between applications and servers.
Guide to identifying and assigning SCSI and Fibre Channel IDs for drives.
Details how the library can be attached to servers via SCSI or Fibre Channel.
Instructions for unpacking and verifying the library shipment.
Detailed steps for installing the library into a rack.
Instructions for connecting cables based on library configuration.
Steps to power on the library and initiate the setup wizard.
Guide to configuring the library using the Setup Wizard.
Explains how cartridges are assigned to system or logical libraries.
Information on creating, modifying, and managing logical libraries.
Procedure for applying license keys for features like capacity expansion.
Steps to configure the library's network settings for remote access.
Overview of the touchscreen interface for library management.
Describes common header elements and subsystem status buttons.
Information on accessing and using the remote web interface.
Explains the different user privilege levels and their access rights.
Overview of customizing the library for specific needs and environment.
Instructions for logging into the operator panel to start configuration.
Guides through setting up network parameters for remote access.
Procedure for entering license keys for features like capacity expansion.
Operating procedures related to the library and its logical libraries.
Information on updating library and drive firmware.
Information on operating the drives installed in the library.
Details on working with tape cartridges, including import/export.
Information on compatibility between Ultrium cartridges and drives.
Details the IBM TotalStorage LTO Ultrium data cartridges and their capacities.
Guidelines for proper handling to ensure cartridge and drive reliability.
Information on ordering tape cartridges and related media supplies.
Explains how the library detects and reports problems to the user.
Lists and explains library operator intervention messages.
Guides on identifying and diagnosing problems using error messages and LEDs.
Explains the meaning of LEDs on various library components for status indication.
Provides information on how to contact IBM Technical Support for assistance.
Lists error codes (Txxx) and their descriptions for library problems.
Provides step-by-step wizards to resolve identified problems.
Specifies the required library state for servicing components.
Instructions for removing and replacing power supplies.
Steps for installing a new drive into the library.
Procedures for removing and replacing the LCB and its flash card.
Instructions for converting the library between desktop and rack configurations.
Lists parts that can be replaced by the customer.
Details the types of power cords and plugs used by the library.
How to retrieve error logs from an RS/6000 system.
How to retrieve error logs from an AS/400 system.
How to retrieve error logs from a Sun System.
Lists and describes TapeAlert flags supported by Ultrium 3 Tape Drives.
Lists Additional Sense Codes (ASC) and Qualifiers (ASCQ) for library errors.
Provides detailed sense data information for LTO tape drives.
Fields for recording general library configuration details.
Fields for recording SCSI and Fibre Channel drive details.
Fields for recording current library and drive firmware levels.
Lists trademarks associated with IBM and other companies.
Compliance statements regarding electronic emissions (FCC, EU, etc.).
Defines the data storage relationship with compression.
Technique for moving data between storage and I/O devices.
Device providing interface between system and tape drives.
Field replaceable unit, a component replaced in its entirety.
Tape storage technology developed by IBM, HP, and Certance.
Small computer system interface standard for peripheral devices.
Vital Product Data, containing drive information for manufacturing and RAS.
To Next Page