IBM System Storage TS3310 - Cabling of a 14 U Library with SCSI Drives

1
Module
communication
terminator
4
Module communication
terminator
7
Fibre drive-to-network cables
2
Module-to-
module
communication
cable
5
Power cord (upper
module)
3
Ethernet cable
(customer
supplied)
6
Power cord (lower
module)
1
Module
communication
terminator
4
Module communication
terminator
7
Power cord
2
Module-to-
module
communication
cable
5
SCSI terminators
8
Power cord
3
Ethernet cable
(customer
supplied)
6
SCSI drive-to-host cable
9
SCSI drive-to-host cable
2. Unplug the cable.
3. Verify that there is no damage to any cable pins.
4. Securely plug in the cable.
5. Repeat this procedure for each cable connected to your library.
1
2
3
4
5
6
7
8
9
a66ug022
Figure 9-9. Cabling of a 14U Library with SCSI Drives
9-14 TS3310 Tape Library Setup and Operator Guide