Chapter 7. Operating Procedures
Library / Logical
Libraries
“Viewing System Information” on page 7-2
“Accessing the Setup Wizard” on page 7-2
“Creating Logical Libraries” on page 7-3
“Deleting/Modifying a Logical Library” on page 7-3
“Assigning Cleaning Slots” on page 7-3
“Assigning I/O Station Slots” on page 7-4
“Entering License Keys” on page 7-4
“Creating Users Accounts” on page 7-4
“Setting the Date and Time” on page 7-5
“Configuring the Library for Remote Access” on page 7-7
“Managing the Network (SSL, Trap Registration, and SNMP Version)” on page 7-5
“Taking a Logical Library Offline/Online” on page 7-7
“Shutting Down/Restarting the Library” on page 7-7
“Viewing Error Messages” on page 7-9
“Capturing a Library Snapshot” on page 7-9
“Viewing Library Information” on page 7-9
“Locking/Unlocking the I/O Station” on page 7-10
Firmware Upgrades “Updating Library Firmware” on page 7-10
“Updating Drive Firmware” on page 7-11
“Using the ITDT SCSI Firmware Update, Dump Retrieval and Drive” on page 7-11
Drives “Viewing Drive Information” on page 7-13
“Loading a Drive” on page 7-13
“Unloading a Drive” on page 7-14
“Taking a Drive Offline/Online” on page 7-14
“Adding a Control Path Drive to a Logical Library” on page 7-14
“Assigning Drive IDs” on page 7-14
“Modifying a Fibre Channel Drive Port Setting” on page 7-15
Cartridges “Importing Data Cartridges” on page 7-15
“Exporting a Data Cartridge” on page 7-15
“Moving Data Cartridges” on page 7-16
“Importing a Cleaning Cartridge” on page 7-16
“Exporting a Cleaning Cartridge” on page 7-16
Library and Logical Libraries
The following sections give information on operating procedures related to the
library or logical libraries within your library.
© Copyright IBM Corp. 2005 7-1
To Next Page
Loading...
