Chapter 12. Parts List
Customer Replaceable Unit (CRU) parts list
To order CRU parts, contact your IBM Sales Representative.
For information on ordering media, refer to “Ordering Media Supplies” on page
8-18.
Important: This library has mandatory CRUs (customer replaceable units). These
CRUs are parts of the library that must be added, removed, and
replaced by the customer. If a customer chooses to have the CRU
added or removed/replaced by an IBM Service Representative, there
will be a charge for the service.
Before ordering a replacement CRU, ensure that the following criteria
is met:
v The failure is repeatable.
v A dump is captured for emailing to IBM Service.
– Use the ITDT tool for drive dumps.
– Use the Web User Interface (Service Library → Capture Log) for
library dumps.
CRU Type Description Feature Code
CRU Part
Number
Assemblies LTO Ultrium Gen 3 LVD Ultra160 drive sled 8037 23R2600
LTO Ultrium Gen 3 Fibre drive sled 8038 23R2601
Power Supply 1900 23R2582
Library Control Blade — 23R2579
Library Control Blade Compact Flash Memory Card — 23R2580
Rack Mount Kit 8006 —
License Keys Capacity Expansion 1640 —
Path Failover 1682 —
Terminators &
Wrap Plugs
Terminator, LVD multi-mode — 19P0874
Terminator, Module Communication — 23R2603
LVD SCSI Wrap Tool — 19P0481
Fibre Wrap Tool — 11P3847
Interposers Interposer, LC-SC fibre cable — 18P8689
Interposer, VHDCI/HD68 SCSI cable — 19P0482
© Copyright IBM Corp. 2005 12-1
To Next Page
Loading...
