library remotely from the Web User Interface. You can, however, return to the
Setup Wizard at any time and modify network and other settings.
Important:
Use the Appendix D, “Library Configuration Form,” on page D-1 to
record all library settings. At this time, there is no way to
electronically save and restore library settings.
Step 1: Log in to the Operator Panel
If necessary, log in to the Operator Panel. If the Setup Wizard: Welcome screen
appears, skip this step.
On the Operator Panel Log in screen:
1. Touch the User name text field to access the alphanumeric keyboards.
2. Use the alphabetic keyboard to enter admin, then touch OK.
3. Touch the Password text field to access the alphanumeric keyboards.
4. Use the alphabetic keyboard to enter secure, then touch OK.
5. Touch OK again to access the Capacity View home screen which displays the
default configuration of the library.
6. Delete the library’s default logical library setting.
a. Select Setup → Delete Logical Libraries. and follow the on-screen prompts.
Now you are ready to configure your library using the Setup Wizard.
a66ug028
Figure 6-1. Operator Panel Log in screen
6-2 TS3310 Tape Library Setup and Operator Guide
To Next Page
Loading...
