8. Touch Exit to return to the Tools menu.
9. Touch the Operations tab, then touch Logical Library Mode to bring your
logical libraries back ONLINE.
Creating Logical Libraries
From the Operator Panel: Setup → Create Logical Libraries
From the Web User Interface: Manage Library → Logical Libraries
Use this menu to create logical libraries within your library. The maximum number
of logical libraries allowed in the library is equal to the number of drives installed
in the library. For more information, see “Determining the Number of Logical
Libraries (Partitions)” on page 2-1 and “Working with Logical Libraries” on page
4-2.
Deleting/Modifying a Logical Library
From the Operator Panel: Setup → Delete Logical Libraries
From the Web User Interface: Manage Library → Logical Libraries
Use this menu to delete or modify logical libraries within your library. When all
library resources are assigned to logical libraries, at least one logical library must
be deleted to make library resources available before a new logical library can be
created or an existing logical library can be modified.
The maximum number of logical libraries allowed in the library is equal to the
number of drives installed in the library. For more information, see “Working with
Logical Libraries” on page 4-2.
Assigning Cleaning Slots
From the Operator Panel: Setup → Cleaning Slots
From the Web User Interface: Manage Library → Cleaning Slots
Use this menu item to designate slots for cleaning cartridges in your library and
automatically enable the AutoClean function. All cleaning cartridges must have
″CLNxxx″ as part of its bar code in order for the library’s bar code scanner to
recognize it as a cleaning cartridge.
For information, see “Cleaning Slots Configuration” on page 4-1.
Chapter 7. Operating Procedures 7-3
To Next Page
Loading...
