reads each cartridge bar code label and the fiducial labels that identify the types of
cartridge magazines and tape drives installed in the library.
Optional Features
The table below lists additional features that can be added to the library to
enhance performance.
Table 1-3. Optional features
Type of Feature Description Feature Code
Ultrium 3 Tape Drives SCSI 8033
Fibre Channel 8035
Power Supply Redundant 1900
Feature Licenses Capacity Expansion 1640
Path Failover 1682
Library and Drive Code
Update
Library and drive code
update by an IBM Service
Representative
0500
For information on ordering additional features or replacement parts for your
library, see Chapter 12, “Parts List,” on page 12-1.
Ultrium 3 Tape Drives
This library supports the Ultrium 3 Tape Drive. Each tape drive in the library is
packaged in a container called a drive sled. The drive is a customer replaceable
unit (CRU), and is designed for quick removal and replacement in the library.
The IBM Ultrium 3 Tape Drive supports LVD Ultra160 or Fibre Channel interfaces.
It features two HD68 connectors or one LC Fibre Channel connector.
Note: LTO-3 SCSI and Fibre Channel drives are not allowed in the same logical
library.
a66ug011
1
Figure 1-5. SCSI Ultrium 3 Tape Drives in the library control module
1-8 TS3310 Tape Library Setup and Operator Guide
To Next Page
Loading...
