EasyManua.ls Logo

IBM System Storage TS3310 - T048: Drive Tapealert Flag 23 - Invalid Cleaning Tape; T049: Drive Tapealert Flag 30 - Hardware a; Cartridge

IBM System Storage TS3310
275 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Detection Scenarios
v Tape drive issues a TapeAlert 22
v Code that manages library based cleaning determines
that a cartridges is consumed based on actively
managing the use count.
Root Causes Cleaning tape is used up.
Possible CRU Replacements
v Tape Cartridge
Resolution If the cartridge is manage by a host application, export the
cartridge via the host application.
If the cartridge is managed by the library, perform the
following:
v Remove the suspect cartridge (see “Exporting a Cleaning
Cartridge” on page 7-16).
v Import a new cartridge (see “Importing a Cleaning
Cartridge” on page 7-16).
T048: Drive TapeAlert Flag 23 - Invalid Cleaning Tape
Description System determines that the drive has issued a TapeAlert 23
indicating that the drive was expecting a cleaning tape but
the loaded cartridge is not a cleaning tape.
Detection Scenario Tape drive issues a TapeAlert 23 which is recognized by
the library during the continuous four second polling cycle
of drive status.
Root Causes
v User or library attempts to mount a cleaning tape but
the tape is not actually a cleaning tape.
v User mistakenly loads a data tape as a cleaning tape
v Inventory or application issue results in data tape being
loaded when drive expects cleaning tape
Possible CRU Replacements
v Tape Cartridge
Resolution If the cartridge is manage by a host application, export the
cartridge via the host application.
If the cartridge is managed by the library, perform the
following:
v Remove the suspect cartridge (see “Exporting a Cleaning
Cartridge” on page 7-16).
v Import a new cartridge (see “Importing a Cleaning
Cartridge” on page 7-16).
T049: Drive TapeAlert Flag 30 - Hardware A
Description System determines that the drive has issued a TapeAlert 30
indicating a hardware error that requires a drive power
cycle before the drive might recover to a usable state.
Detection Scenario Tape drive issues a TapeAlert 30 which is recognized by
the library during the continuous four second polling cycle
of drive status.
Root Causes Drive has determined that there is a problem per its
internal algorithms.
10-20 TS3310 Tape Library Setup and Operator Guide

Table of Contents

Related product manuals