v The Operations menu consists of commands that enable you to change the
library’s mode of operations, import and export cartridges, load and unload
drives, move media, and shutdown/restart the library.
v The Tools menu consists of commands that you can use to maintain your library
such as viewing operator interventions, capturing the library snapshot,
identifying ports, and updating firmware using an FMR (Firmware) cartridge.
a66mi063
Figure 5-5. Setup menu screen
a66ug029
Figure 5-6. Operations menu screen
5-6 TS3310 Tape Library Setup and Operator Guide
To Next Page
Loading...
