Capacity View
The Capacity View screen provides tabular data on the capacity of the various
areas of the library. Use this screen to see a quick summary of the capacity of the
library based on a user login.
If users have access to more than one logical library, they can navigate to other
logical libraries using arrows next to the logical library name at the top of the
screen.
If an administrative user is logged in, a view of the physical library appears.
If a user is logged in, the first logical library that they have access to, in
alphabetical order, appears.
Library View
Library View provides a graphical representation of the library as well as another
mode of navigation. Use this screen to navigate through the library. The control
module (CM) is labeled with ″hot″ areas that can be selected to access the
functions for each area of the library. The Library View screen navigation buttons
are the same as the tabular navigation from the Capacity View screen, only
organized in a different manner.
a66ug025
Figure 5-3. Capacity View Home screen
5-4 TS3310 Tape Library Setup and Operator Guide
To Next Page
Loading...
