IBM System Storage TS3310 - Cabling of a 5 U Library with Fibre Drives; Picker LED; Reseating Cables

Reseating Cables
To reseat library cables and terminators, perform the following steps:
1. Locate the cable or terminator by referring to the appropriate figure below.
1
Module
communication
terminator
3
Module communication
terminator
5
Fibre drive cable
2
Ethernet cable
(customer
supplied)
4
Power cord
a66ug047
1
Figure 9-5. Picker LED
1
2
3
4
5
a66ug023
Figure 9-6. Cabling of a 5U Library with Fibre Drives
9-12 TS3310 Tape Library Setup and Operator Guide