Using the PC Card Slot
Note:
If you are using a PC Card with an
XJACK** connector, insert it into the
upper
slot.
If you are using a Zoomed Video port
card, insert the card into the
lower
slot.
2
Insert the card into an appropriate slot according to your card
type. Slot covers fold to the inside when you insert the cards:
If you are using a Type I or Type II PC Card, insert it into
either the upper slot A or the lower slot B .
If you are using a Type III PC Card, insert the card into the
lower
slot B .
Press the card firmly into the connector 1 until the eject button
pops out 2 . Then, pull the eject button out slightly and fold it to
the right 3 .
You have completed the installation of the card. Refer to the
following sections:
To use PC Cards, see “Using PC Cards” on page 46.
To use PC Cards with power-saving functions, see:
– “Considerations for Suspend Mode” on page 67.
– “Considerations for Hibernation Mode” on page 71.
Chapter 6. Installing and Removing Options 87
To Next Page
Loading...
