IBM ThinkPad 380 - Installing or Removing the DIMM

Installing or Removing the DIMM
Installing or Removing the DIMM
1 Turn off the computer; then disconnect the AC Adapter and all
cables from the computer.
2 Touch any metal object with your hand to release any static
electricity.
3 Turn the computer over.
4 Loosen the screw on the memory slot cover and remove the
cover.
Attention:
To avoid damaging the DIMM, do not
touch its contact edge.
5 Which are you going to do?
Install a DIMM Go to the next step.
Remove a DIMM Go to step 7 on page 92.
90 IBM ThinkPad 380 or 380D User's Guide