Installing or Removing the DIMM
8
Place the memory slot cover over the memory slot; then install
the screw back into its place.
9
Turn the computer over again.
10
Open the LCD and power on the computer.
11
To confirm that the DIMM is correctly attached to the
computer, do the following:
Note:
1Megabytes=1024Kilobytes
a) Calculate your total memory size in kilobytes (KB) by adding the
DIMM memory size to the base memory size (16,384KB).
For example, if you installed a 16Megabytes DIMM, calculate the
total memory size as follows:
16(Megabytes) x 1 24(Kilobytes) + 16 (Kb) = 32384(KB)
Note:
To start Easy-Setup, press and hold
F1; then turn on the computer.
b) Start Easy-Setup and confirm the memory size count at the
upper left corner of the screen as shown:
32384 KB OK
If a 21 error code appears under the memory count, turn off the
computer and go to page 90 to reinstall the DIMM.
32384 KB OK
2 1
Chapter 6. Installing and Removing Options 93
To Next Page
Loading...
