IBM ThinkPad 380 - Page 142

Installing DOS Software
Installing the PC Card Support Software for DOS
To use the PC Cards in DOS, install the CardSoft** software:
1. Insert the diskette containing the CardSoft software.
2. At the DOS command prompt, type a: and press Enter.
3. At the A:\> prompt, type install and press Enter.
The installation panel appears.
4. Follow the instructions on the screen.
During installation, use the Arrow keys (↓ or ↑ ) to highlight your
selection; then press Enter.
5. After the installation is complete, remove any diskette from the
diskette drive and restart the computer.
Installing the Audio Support Software for DOS
To install the audio device driver:
1. Start DOS.
2. Insert the Audio Support diskette for Windows 3.1 into the
diskette drive.
3. Type A: and press Enter.
4. Type Install and press Enter.
122 IBM ThinkPad 380 or 380D User's Guide