IBM ThinkPad 380 - Page 144

Installing Windows Version 3.11 Software
Important
During installation, do the following for Windows to operate
correctly:
When the Windows Setup program asks you to select either
Express Setup or Custom Setup, select C for Custom
Setup.
Install Windows Version 3.11 with the default VGA display
driver that came with Windows. After you complete the
installation of Windows, install the ThinkPad display driver.
Note:
If you have installed OS/2, the path
to install Windows may have
changed to C:\OS2\MDOS\WINOS2
(C is the drive on which you installed
OS/2). If so, change the path to:
C:\WINDOWS
Do the following to install Windows Version 3.11 with Advanced
Power Management (APM):
1. Install Windows Version 3.11 with the APM option:
a) Start the installation as specified in the Windows manual.
b) When the Windows Setup program asks you to select
Express Setup or Custom Setup, type C for Custom
Setup.
c) Continue installing Windows Version 3.11 until the following
screen appears:
Windows Setup
===============
Setup has determined that your system includes the following hardware
and software components. If your computer or network appears on the
Hardware Compatibility List with an asterisk, press F1 for Help.
Computer: MS-DOS System
Display: VGA
Mouse: Microsoft, or IBM PS/2
124 IBM ThinkPad 380 or 380D User's Guide