IBM ThinkPad 380 - Page 152

Installing Windows NT Software
To install the audio support software, do the following:
1. Start Windows NT 3.51.
2. Insert the Audio Support Diskette to Windows NT into the
diskette drive of the computer.
3. Go to Main.
4. Click on Control Panel and then Drivers.
5. At the Install Driver menu, click on Add... and select Unlisted or
Updated Driver.
6. Specify the drive and path name as A: and select OK.
7. Select CrystalWare Audio driver and select OK.
A warning message appears on the screen and prompting you to
restart Windows NT.
8. Click on the Do not Restart Now button.
9. Click on CrystalWare Audio driver. Then click on Setup button
in the Drivers window.
10. Set the current I/O Resources setting for audio in your
computer.
11. When the installation program prompts you, restart Windows NT
to make the change effective.
132 IBM ThinkPad 380 or 380D User's Guide