IBM ThinkPad 380 - Page 202

Advanced Information for PC Card for OS/2
Registering a PC Card in Auto Configurator
1. Select a card from the Available Cards list in the Auto
Configurator Utility main panel.
Select the card for which you want to assign the resources first.
For example, when you want to assign COM3 to a modem card,
and not COM2, select the setting for COM3 first.
2. Click on the Add>> button.
3. Click on the Save button.
The names in the left list box (Available Cards) are the cards
that can be registered. The names in the right list box (Selected
Cards) are the cards that are already registered in Auto
Configurator. When a PC Card is installed, Auto Configurator
starts from the top of the list to assign the resources to the card.
Deleting a Registered Card
1. Select the PC Card you want to delete from Selected Cards in
the Auto Configurator Utility main panel.
2. Click on the Delete button.
3. Click on the Save button.
182 IBM ThinkPad 380 or 380D User's Guide