Attaching an External Monitor
Hints and Tips
The virtual screen function is available in all operating systems.
It is used to display a part of the high-resolution screen image
that is produced by the computer. Other parts can be seen by
moving the screen with the TrackPoint III or other pointing
devices. The virtual screen can be disabled on Windows 3.11 or
Windows 95 with using ThinkPad Features program.
Connecting an External Monitor to the Computer
Attention:
Do not disconnect the external
monitor while the computer is in
suspend mode or hibernation mode.
If no external monitor is attached
when the computer resumes, the
LCD remains blank and the output is
not displayed. This does not depend
on the resolution value.
To attach an external monitor to the computer:
1
Turn off the computer.
2
Attach the external monitor to the external monitor connector
on the rear of the computer, then to the electrical outlet.
3
Turn on the external monitor and the computer.
Chapter 3. Operating Your Computer 43
To Next Page
Loading...
