IBM ThinkPad 380 - Page 86

Using Power Management
To enable RediSafe suspend mode, do the following:
OS/2
WIN
If you are using OS/2 or Windows :
1. Start the ThinkPad Features program.
2. Click on Battery ( ) then click on
Suspend/Hibernation/Resume options ( ).
3. If a hibernation file has not been created, click on Enable
hibernation and create the file on the hard disk drive.
4. Click on the check box next to RediSafe suspend. (A mark
appears in the check box when RediSafe suspend is selected.)
5. Click on OK.
DOS
If you are using DOS :
1. Type PS2 HFILE C at the command prompt; then press Enter to
create the hibernation file on drive C (type the drive letter of your
choice).
2. Type PS2 SA E at the command prompt; then press Enter to
enable suspend mode.
66 IBM ThinkPad 380 or 380D User's Guide