IBM ThinkPad 380 - Page 90

Using Power Management
The following describes how to create a hibernation file for your
operating system:
OS/2
WIN
If you are using OS/2 or Windows:
1. Turn on the computer and start the ThinkPad Features program.
2. Click on Battery ( ).
3. Click on Suspend/Hibernation/Resume options ( ).
4. Click on Enable Hibernation in the menu.
5. Make sure the hard disk drive in the computer is selected; then
select OK to create the hibernation file.
The computer can now enter hibernation mode.
DOS
If you are using DOS:
Type PS2 HFILE C at the command prompt; then press Enter.
The hibernation file is created on drive C.
70 IBM ThinkPad 380 or 380D User's Guide