IBM ThinkPad 380XD - Page 121

Saving Battery Power
Enabling Hibernation Mode
To enable hibernation mode, do the following:
For Windows 95:
1 Start the ThinkPad Configuration program.
2 Click on the Power Management ( ) button.
The “Power Properties” window appears.
3 Select the Hibernation tab.
The “Hibernation” subwindow appears.
4 Click on Enable Hibernation. (If you have already
created a hibernation file, this button appears in gray
and you cannot click on it.)
The “Enable Hibernation” subwindow appears.
5 Click on Create Now.
6 Click on Close; then OK.
For Windows NT, Windows 3.11, or OS/2:
1 Start the ThinkPad Configuration program.
2 Click on the Power Management ( ) button.
3 Click on the Suspend/Resume Options ( ) button.
The “Suspend/Resume Options” window appears.
4 Click on the Enable Hibernation.. button.
5 Click on OK.
Chapter 3. Using Battery Power 101