Using an External Pointing Device
Attaching a Mouse
You can use
both
the IBM PS/2 Miniature Mouse and the
TrackPoint III as the pointing device. If you are connecting a
mouse other than an IBM PS/2 Miniature Mouse, first turn off the
computer. Then go to “Disabling the TrackPoint III” on page 51.
If you want to use the external numeric keypad and mouse at the
same time, first connect the keypad cable to the computer; then
connect the mouse cable 1 to the connector at the rear of the
keypad.
1
Note:
You can remove the keypad cover and use it as a stand for the keypad.
Chapter 2. Operating Your Computer 49
To Next Page
Loading...
