Switching between the LCD and an External Monitor
6
Set your monitor type and display device driver as
follows.
If you are attaching an SVGA monitor, refer to “Using SVGA
Video Mode” on page 56 for information on the supported color
depth or resolution.
a)
Click on the Display ( or
) button.
b)
Click on the Advanced Properties.. button.
You can select your display type from the monitor list, or
click on a new resolution or refresh rate.
7
Restart the computer to make the changes effective.
Note: Refer to the specifications for your external monitor to determine its
supported resolutions and refresh rates.
Chapter 2. Operating Your Computer 53
To Next Page
Loading...
