2. If you want to connect a printer to your computer, connect
one end of the printer cable to the parallel connector and the
other end to your printer. Then power on the printer.
3. Connect the AC Adapter to the computer's power jack (at the
rear of the computer) in the order shown.
4. Open the liquid crystal display.
Pull the liquid crystal display (LCD) latches (1) and open the
LCD (2). Then position the LCD so that it is convenient for
viewing.
5. Power on the computer.
a. Push and release the power switch (1). The power
switch automatically snaps back to its original position.
b. Adjust the display's brightness (2).
Copyright IBM Corporation 1998 3
To Next Page
Loading...
Need help?
General