Overall Procedure
1
Have the Windows 95 installation package in hand.
2
Back up your software and personal data files on the hard disk.
3
Go to the ThinkPad Web site and download the latest hardware
driver diskettes. You need to create at least the following
device driver diskettes:
4
Install Windows 95 and the software.
Note: To use the CD-ROM drive to install Windows 95, create the
DOS boot diskette that enables you to use the CD-ROM drive.
Then boot the system with the diskette.
Device Driver Diskette Name
ThinkPad Configuration
program
Utility Diskette for Windows 95
Utility Diskette for DOS, Personalization
Utility Data Diskette I
Display driver Video Features Diskette (NM2200) for
Windows 95/98
PC Card support software CardWorks for Windows 95
Audio device driver Audio Features Diskette for Windows 95/98
TrackPoint driver TrackPoint Driver Diskette for Windows
95/98/NT
ThinkPad Modem driver ThinkPad Modem for Windows 95/98/NT
Installing Microsoft Windows 95
Some new files must be incorporated at the time of installation.
Installing Windows 95 OSR1
1
Create a Windows 95 supplementary diskette using the
Diskette Factory program (refer to the
User's Reference
).
2
Make sure there is enough space in the hard disk to store the
cabinet files and the installation programs (the required space
might vary depending on the national language supported by
your version of Windows 95).
3
Make a temporary directory.
Chapter 8. Installing Software 117
To Next Page
Loading...
