For example, enter at the DOS prompt:
MD c:\win95
4
Insert the Windows 95 CD-ROM into the CD-ROM drive.
5
Copy all the cabinet (.CAB) files and the installation programs
from the \WIN95 directory of the Windows 95 CD-ROM to the
temporary directory.
For example, enter at the DOS prompt:
COPY src_cd:\WIN95\ . . c:\win95
where src_cd is the drive letter of the CD-ROM drive (D, E,...),
c is the drive letter of your hard disk drive, and win95 is the
temporary directory that you made in step 3 on page 117.
6
Insert the Windows 95 supplementary diskette you created in
step 3 on page 117 into the diskette drive.
7
Copy the updated files from the Windows 95 supplementary
diskette to the temporary directory.
For example, enter at the DOS prompt:
COPY A:\OSR INF\ . c:\win95
where c is the drive letter, and win95 is the temporary directory
that you made in step 3 on page 117.
8
Install the operating system by entering SETUP.EXE at the
temporary directory prompt.
9
Refer to the Windows 95 documentation and the instructions
that appear on the screen to complete the installation.
10
If required, install the Service Pack Version 1, available from
the Microsoft Internet home page.
11
Remove all the files in the temporary directory and then remove
the directory itself after you complete the installation, to free the
space on the hard disk.
Installing Windows 95 OSR2.1
118 IBM ThinkPad 600E Online Book
To Next Page
Loading...
