2
Open the CONFIG.SYS file with your text editor; then find the
following line:
DEVICE=C:\xxxxxx\IBMTPCD.SYS /R
Note:
xxxxxx
is the subdirectory where you have installed the
CD-ROM device driver. The default subdirectory for
C:\
xxxxxx
is C:\CDROM.
If you cannot find the line, quit the file and go to step 4.
3
Comment out the line to change it as follows:
REM DEVICE=C:\xxxxxx\IBMTPCD.SYS /R
If the line is already commented out, quit the file and go to the
next step.
4
Open the AUTOEXEC.BAT file; then find the following line:
C:\xxxxxx\MSCDEX.EXE /D:TPCD 1 /M:15
xxxxxx
is the subdirectory where you have installed the
CD-ROM device driver. If you cannot find the line, quit the file
and go to step 6.
5
Comment out the line to change it as follows:
REM C:\xxxxxx\MSCDEX.EXE /D:TPCD 1 /M:15
If the line is already commented out, quit the file and go to the
next step.
6
Exit the DOS command prompt; then reboot the system.
Chapter 8. Installing Software 129
To Next Page
Loading...
