4
Insert the Utility Diskette for Windows NT into the diskette
drive.
5
Type A:\SETUP and press Enter.
Follow the instructions on the screen.
Installing the Display Driver for Windows NT
To install the display driver for Windows NT:
1
Start Windows NT, and log on with the user ID authorized as
an administrator.
2
Click on Start.
3
Move the cursor to Settings; then click on Control Panel
4
Double-click on the Display icon.
5
In the “Display Properties” window, click on the Settings tab.
6
Click on Display Type....
7
In the “Adapter Type” window, click on Change.
8
Click on Have Disk....
9
Insert the Video Features Diskette (NM2200) for Windows NT
4.0 into the diskette drive; then click on OK.
A selection list appears.
10
From the display devices in the selection list, click on
NeoMagic MagicMedia 256AV, and click on OK.
The message “You are about to install a third-party driver”
appears on the screen.
|
11
Click on Yes to continue the installation.
|
12
When you are prompted to restart the computer, click on OK
| and remove the diskette from the diskette drive.
13
Click on Close.
14
Click on Close.
132 IBM ThinkPad 600E Online Book
To Next Page
Loading...
