Installing Software for OS/2 Warp 4
This section describes how to install OS/2 with DOS and Windows
3.1, as well as the OS/2 ThinkPad device drivers.
Overall Procedure
1
Have the DOS, Windows 3.1, and OS/2 installation packages in
hand.
2
Back up your software and personal data files on the hard disk.
3
Download the device driver diskettes for DOS, Windows 3.1,
and OS/2 and install them. See the Web site for installation of
the each operating system.
4
Go to the ThinkPad Web site and download the latest hardware
driver diskettes. You need to create at least the following
device driver diskettes:
5
Install OS/2 and the software.
Device Driver Diskette Name
ThinkPad Configuration
program
Utility Diskette for OS/2
Utility Diskette for DOS, Personalization
Utility Data Diskette I
PC Card support software PC Card Director for OS/2
Audio device driver Audio Features Diskette for OS/2
Infrared device driver Infrared Features Diskette II
TrackPoint driver TrackPoint Driver Diskette for OS/2
Display driver Video Features Diskette (NM2200) for OS/2
ThinkPad Modem driver ThinkPad Modem for OS/2
Installing IBM OS/2 Warp
Preparing for the Installation of OS/2
1
Create OS/2 Warp Version 4 Install Diskette 1 Update and
OS/2 Warp Version 4 Install Diskette 2 Update using the
Diskette Factory Program (refer to the
User's Reference
.).
Chapter 8. Installing Software 149
To Next Page
Loading...
