After OS/2 has been successfully installed, restart the
computer.
Installing the ThinkPad Configuration Program for OS/2
To install the ThinkPad Configuration program for OS/2:
1
Start OS/2; then insert the Utility Diskette for OS/2 into the
diskette drive.
2
Install the ThinkPad System Management device driver:
a
Open OS/2 System, System Setup, and then
Install/Remove.
b
Click on Device Driver Install and click on the Install...
button.
c
Click on ThinkPad System Management Device Driver;
then click on OK.
3
Open the OS/2 screen command prompt.
4
Type A:\INSTALL2 and press Enter.
Follow the instructions on the screen.
Installing the PC Card Support Software for OS/2
To use PC Cards, you need to install the following device drivers and
software associated with PC Cards:
PC Card support program (PC Card Director):
– Card Services device driver
– Socket Services device driver
– PC Card Power Management device driver
– PC Card Director utility
PC Card client device drivers (only when PC Card Director does
not support the PC Card)
To install the PC Card support software for OS/2:
1
Start OS/2; then open the OS/2 full-screen command prompt.
Chapter 8. Installing Software 151
To Next Page
Loading...
