IBM ThinkPad 600e - Page 176

3 Click on the Network icon.
The “Network” window appears.
4 Select either the Enable or the Disable button beside “Wake.”
5 Click on OK.
or
1 Go to the Easy-Setup menu.
2 Click on the Startup icon.
The “Startup” window appears.
3 Click on the Network icon.
The “Automatic Power On Startup Sequence” window appears.
4 Select either the Enable or the Disable button beside “Wake.”
5 Click on OK.
Setting Up for NetFinity Service
If you have NetFinity Service 5.0 installed in the network and wish to
use the Wake on LAN function, do the following:
For Windows 95 systems:
Add the following line in the AUTOEXEC.BAT file in the root directory
of the boot drive:
SET NFWAKEONLAN=YES
For Windows NT systems:
1 Log on to the system with administrator privilege.
2 Double-click on the System icon in the Control Panel window.
3 Click on the Environment tab.
4 Click on one of the system variables.
168 IBM ThinkPad 600E Online Book