5
Change the variable name to “NFWAKEONLAN” and value to
“YES,” and click on the Set button.
6
To save the new settings, click on OK.
7
Restart the system.
Automatic Power-On Startup Sequence
The Automatic Power-On Startup Sequence settings determine the
order in which devices in or attached to your computer will start
when your computer is turned on remotely.
To define a sequence:
1
Go to the Easy-Setup menu.
2
Click on the CONFIG icon.
The “Configuration” window appears.
3
Click on the Network icon.
The “Network” window appears.
4
Click on the Startup icon.
The “Automatic Power On Startup Sequence” window appears.
5
Define a sequence by clicking on the devices in the order you
want them to start.
The devices you choose appear in boxes 1 to 4.
6
Click on OK.
or
1
Go to the Easy-Setup menu.
2
Click on the Startup icon.
The “Startup” window appears.
3
Click on the Network icon.
The “Automatic Power on Startup Sequence” window appears.
Chapter 9. Using System Management 169
To Next Page
Loading...
